Skip to content
senn-techsenn-tech
Back to blog
Smart Home
Smart home and building automation2026-11-15· By Franz Senn

Home Assistant Connect AUX-2: one box for audio, serial and PoE

Nabu Casa introduced the Home Assistant Connect AUX-2 on 11 November 2026. The vendor lists it at 69 US dollars or 59 euros (recommended price), and it combines audio output, serial control, a Bluetooth proxy and PoE-powered radio-stick hosting. We do not have the unit and measured nothing. This post restates the product page and the announcement, read on 15 Nov 2026, and marks what is vendor claim.

In short: The Connect AUX-2 is an ESP32-S3 device running ESPHome firmware. It plays music over a 3.5 mm jack or optical, talks to TVs and AV receivers over two RS-232 ports (3.5 mm sockets), takes a Z-Wave stick (ZWA-2) or an RS-485 adapter on its USB-A port, and runs on PoE or USB-C. It can only control devices that have a Home Assistant integration.

What sits in the box

The product page names an ESP32-S3 and a TI PCM5122 converter with 112 dB signal-to-noise ratio. The audio output is one combined port for a 3.5 mm jack and optical (S/PDIF), only one of them at a time, at 24-bit, 48 kHz stereo. According to the announcement, the box senses whether an analogue or digital cable is plugged in and switches by itself. There are also two 3.5 mm serial ports for RS-232, one USB-A port, a Grove port for GPIO and I2C sensors, and a USB-C input. Power comes from PoE (802.3af) or USB-C at 5 volts and at least 2 amps, one source at a time. Radio is Wi-Fi on 2.4 GHz and Bluetooth 5 (LE).

The announcement says that on Ethernet the Bluetooth proxy no longer shares its antenna with Wi-Fi. The vendor puts power draw at no more than a watt or two ("never sips more than a watt or two"); that is not measured.

The serial ports are the main reason to look at the device. The vendor says TVs and AV receivers connect directly to control source, volume and power, also from standby. RS-485, and with it Modbus, works only through an extra USB adapter, which the announcement prices at about 15 dollars. The product page names HVAC, UPS and solar inverters as examples. No cables or adapters are included; DB9, RJ11 or mini-DIN need converter cables. Two switches on the underside swap transmit and receive in case a cable is crossed.

Home Assistant logo
Nabu Casa announced the Connect AUX-2 on 11 November 2026. All datasheet values come from the product page and the announcement. (Quelle: Simple Icons, file homeassistant.svg (CC0))
The AUX-2 turns a serial cable into a network connectionHome Assistantneeds an integration for thedeviceNetwork (PoE)Ethernet instead of a cableacross the houseConnect AUX-2RS-232 to the TV or receiver
Our own diagram based on the product page and the vendor FAQ. (Quelle: Home Assistant, product page)

What holds up, where the limit is

The limit is in the vendor FAQ: the box controls only serial devices that have a Home Assistant integration. A serial port is not an integration. The AUX-2 turns an RS-232 cable into a network connection, and the integration has to do the rest. Before buying, put the integration list next to your own device's datasheet. The vendor's example is the LG TV serial integration.

The second limit is the role as an output device. Music comes from Music Assistant, which, per the FAQ, finds the AUX-2 automatically as a Sendspin player. The vendor describes the unit as built for playing: it has no audio input and does not amplify, so unpowered speakers need an amplifier. Grouping with other speakers (AirPlay, some Sonos models) is done by Music Assistant.

The third limit concerns the radio stick. The announcement says the vendor tested Z-Wave over the network for months. Zigbee (ZBT-2) works but is deliberately not advertised yet; the FAQ calls it not widely tested, ZHA only (not Zigbee2MQTT) and Home Assistant 2026.11 or later. Thread does not work because the link is too latency-sensitive.

The spyware case

The announcement describes cutting a TV off from the internet and still controlling it over the serial port, because the TV would otherwise send data out. That is the vendor's recommendation, and it rests on the integration for LG TVs. Whether a specific model has a usable serial service port is not in the sources and has to be checked per model.

The same pattern sits behind the PoE decision. A Z-Wave stick on the Home Assistant machine sits where that machine sits, which the announcement says is often a basement or behind thick walls. In the AUX-2's USB-A port the stick can move to the spot with the best reception and needs only a network cable. The vendor recommends the wired setup. For Wi-Fi it reports only a small latency increase (tested by Nabu Casa with the ZWA-2, not by us) but a risk of instability.

Two posts from our smart-home area fit here: the comparison of Wi-Fi plugs for Home Assistant and how Home Assistant, Loxone and a local language model work together. The smart-home topic hub collects every post on this class of device. For planning in a business setting, start with our services.

Datasheet

Values from the product page and announcement, read on 15 Nov 2026. We do not have the device and measured none of it.

QuantityValueSource
Price (recommended)69 USD / 59 EURproduct page
ProcessorESP32-S3product page
ConverterTI PCM5122, 112 dB SNRproduct page
Audio outputjack or optical (one at a time), 24-bit / 48 kHz stereoproduct page
SynchronisationSendspin via Music Assistantproduct page, FAQ
Serial2 × RS-232 (3.5 mm), TX/RX switches; RS-485 via USB adapterproduct page, announcement
USB-Afor Connect ZWA-2 and RS-485 adapterproduct page
SensorsGrove port (GPIO, I2C)announcement
PowerPoE 802.3af or USB-C 5 V / 2 A, one sourceFAQ
RadioWi-Fi 2.4 GHz, Bluetooth 5 (LE)product page
SoftwareESPHome, unlocked bootloaderproduct page
RequirementHome Assistant 2026.9 or later, Zigbee 2026.11FAQ
Size / weight106 × 63 × 25 mm, 104 gproduct page

Open points

  • Power draw, PoE behaviour on our switches and audio quality: not measured.
  • The product page lists optical and analogue in the specifications, but its FAQ names only the 3.5 mm output for playback. We did not resolve that; the announcement describes the optical output explicitly.
  • Whether a given TV or receiver has a usable serial service port and an integration is open per device.
  • The vendor points to a technical deep dive on Modbus that we did not read.
  • We have no hands-on experience with the device.

Read next: Philips Hue Bridge: Pwn2Own flaws in the HomeKit service · the Bambu Lab H3C on a company network

Further Reading

Vendor information (not independently verified)

From us

Questions?
Does the AUX-2 control any device with a serial port?+

No. According to the vendor FAQ it controls only serial devices that have an integration in Home Assistant. The box provides physical access over RS-232, and over RS-485 only with an extra USB adapter. For an AV receiver with an integration that is enough; for a device without one it stays a port that does nothing.

Can the AUX-2 play or receive Bluetooth audio?+

No, says the vendor FAQ. The Bluetooth antenna serves the Bluetooth proxy for smart-home devices. The AUX-2 has an audio output only, no input.

Does the AUX-2 need a cloud?+

It needs Home Assistant 2026.9 or later for setup and management. The vendor describes it as a native device with local control. Per the vendor, the firmware runs ESPHome, the bootloader is open and you can flash your own firmware. Whether the device uses any cloud service beyond that is not stated on the vendor pages.