The Bambu Lab H3C on a company network: nine tools, no network cable, two cameras
CNC Kitchen printed a Bambu Lab H3C for just under 400 hours. The verdict of that test stays out of this post, because no machine of this series stands in our rooms. We read the manufacturer's data sheet under the question that sits in front of every company purchase: how does a device like this behave on a network where more is going on than in a home workshop? Four entries are worth knowing, plus two cameras and two sums. The nine tools in the title are the nine nozzle tools of the changer system per the data sheet (Swaptek, 9-Tool Switching).
Status of this post
The test video from CNC Kitchen DE appeared on 5 November 2026, runs 43:06 minutes and carries 30 timestamps. It is an independent test, and the description holds a long chain of affiliate links to retailers. The written report by the same author is the more usable document and the one we cite. Every figure stays one person's measurement.
The network side: four entries that read “not present”
The data sheet has a network section of its own, retrieved 6 November 2026 and checked again against the page on 15 November 2026 with unchanged entries. Two points are independently confirmed: the FauxHammer review also names no Ethernet, and gives 64 GB of eMMC, as does CNC Kitchen (64 GB of storage). No kill switch, no 802.1X and the end of support appear only on the vendor's own pages; we found no second source for them. The rows below quote the manufacturer's English wording.
| Field in the data sheet | Entry |
|---|---|
| Ethernet | Not present |
| Wireless network | Wi-Fi 6, IEEE 802.11 a/b/g/n/ac/ax |
| Network kill switch | Not present |
| Removable network module | Not present |
| 802.1X network access control | Not present |
| Built-in storage | 64 GB eMMC, plus USB |
| Cameras | Live view and toolhead (1920 × 1080 each), bird’s-eye view optional |
No 802.1X means no sign-in with a device certificate and no PEAP; a network that onboards endpoints into VLANs through 802.1X will not take this device. Which encryption methods the H3C negotiates is not listed on the vendor's pages. No Ethernet means no segmentation through the switch port: the radio link is the only path and the only layer 2 attack surface.
The vendor can do it, just not on this machine. For the H2D Pro, retrieved on 15 November 2026: “Stable Ethernet Connection, WPA2-Enterprise Authentication Wi-Fi Connection” with EAP-PEAP, EAP-TLS and EAP-TTLS, plus “individual physical kill switches for Wi-Fi”. Why the H3C does not get these functions, the vendor does not say.
The comparison page (read on 15 November 2026) carries the H3C in its data with security patches until 3 November 2033 and the connection “Wifi (5G&2.4G)”. For the H2D, X2D and P2S the end of security patches reads March 2032, April 2033 and October 2032. After that the vendor promises the devices keep running “with the same feature availability”, without new patches. On a company network the date of the last patch belongs on the spec sheet. An earlier reading had not found the H3C there; whether the entry is new or was overlooked, we do not know.
No kill switch and no removable module means the connection cannot be severed at the device. Left are the power supply, the network name at the access point or a time switch; whoever must prove a shutdown measures it there.
Two cameras are fitted, one on the build chamber and one on the toolhead. According to CNC Kitchen the downward-facing camera mainly serves motion calibration with the optional vision encoder plate. In a workshop that receives visitors that is the trade-off of a webcam on a desk.
LAN mode and the security note
The manufacturer's knowledge base describes a LAN mode that runs without internet. That drops remote control from outside the network, the phone app and the print history. Named there are the H, P2S and X series; the H3C is absent from that list, although CNC Kitchen and FauxHammer report LAN operation for it (reported, not tried by us). Treat that as a condition of an order and you should have it confirmed in writing before buying.
The product page in the European shop carries a cybersecurity note naming Article 3(3)(d) and (e) of the Radio Equipment Directive and, beside it, ETSI EN 303 645 in version 2.1.1 from 2020. The Delegated Regulation (EU) 2022/30 fills in exactly those requirements of Directive 2014/53/EU and has applied since 1 August 2025: the original date was 1 August 2024, postponed by twelve months (per Schutzwerk, reported; EUR-Lex was not reachable on 15 November 2026, so we could not check the date there ourselves). The same source names a repeal of the regulation once the Cyber Resilience Act applies in full from 11 December 2027. EN 303 645 is a voluntary baseline for consumer connectivity, free as a PDF (retrieved 15 November 2026: version V2.1.1 of June 2020). We read that sentence as a statement by the manufacturer. No notified body signature stands behind it.
Two sums: waste and standby
Purge waste at the tool change. Every nozzle change costs cleaning material. Four figures, none measured by us. The vendor's 0.038 g sits on the product page with the addendum “internal testing under optimal conditions”; its reference to PLA Basic in the economical purge mode describes the six seconds of a filament change and says nothing about the amount.
| Figure per change | Who measured it |
|---|---|
| 0.038 g | Vendor, own test; footnote: varies with material and settings |
| about 0.05 g | CNC Kitchen, own measurement on the Majora’s Mask model |
| 0.013 g | Prusa, an advertising figure for the Core One+ INDX |
| about 0.01 g | CNC Kitchen on his own Prusa Core One with INDX |
By the tester's count the large model needs more than 4,000 tool changes, and he adds up “almost 200 g” himself. Our arithmetic checks that against all four figures: 200 g at the measured 0.05 g, 152 g at the vendor's 0.038 g, 52 g at the competitor's 0.013 g, 40 g at the 0.01 g from his own machine. No system of this build runs waste-free: according to CNC Kitchen, Prusa's INDX system primes too, at the side rather than on a tower. On his own figures the printed model weighs only a little more than twice the waste. Up to 24 colours with extra feed units push that number further. We name no euro amount, because no filament price per kilo is measured on our side.
Standby across a year. The data sheet gives 12.2 to 12.7 watts of standby power with the wireless link connected and 11.7 to 12.2 watts without one. Across 8,760 hours that is 102.5 to 111.3 kilowatt hours a year, at 21 cents per kilowatt hour, the lower end of the corridor listed by an Austrian price portal (21 to 25 cents gross, household prices, March 2026), worth 21.50 to 23.40 euros. That is an order of magnitude only: a business usually pays another tariff, mostly net and under its own contract, so insert your own price. The tester measured around 175 watts at the mains plug with PLA, 350 watts with ABS and ASA and 14 watts idling in power-saving mode; the data sheet names 240 watts of continuous draw for PLA and a maximum of 2,250 watts.
What we did not measure
No H3C stands in our rooms: no print of our own, no measurement of our own. On surfaces, dimensional accuracy and TPU we say nothing. Four points stay open.
The material feed. The data sheet lists a maximum drying temperature of 85 °C and two drying slots for the AMS 3H unit, with a footnote that a built-in sensor does the measuring. The reviewer describes two things that appear in no row: the machine stands so high that he needs a ladder or the Bambu Station for the upper tray, and the feed cannot pull filament back, so every roll change starts with an unload move, which he calls his biggest annoyance. Both are one household's experience, worth walking through first in a company with several devices.
The nozzle diameters. The vendor advertises changing the size mid-project, with the addendum that “Mix nozzle sizes” needs extra hotends sold separately. The tester tried it and writes that he mixed in nozzles down to 0.2 mm. What that costs in spare parts we have not worked through.
Prices of the comparison machines. The tester names 2,369 US dollars for the eight-filament Core One with INDX, camera and filter included, and 3,069 dollars in the larger build. The Prusa page stands on 6 November 2026 at 2,209 euros assembled and 1,909 euros as a kit, delivery after 21 December 2026. Two currencies, no conversion by us.
Availability. The H3C Combo sits in the European shop at 2,499 euros, on backorder with an expected date of 26 November 2026. The tester names 2,499 dollars: the same digits in two currencies, so two prices. The separate E1 air purifier costs 199.00 euros in that shop.
Related
The post Robot vacuums on the network: what the Ecovacs X12 reports puts the same question to another device. More cases in the Security and Privacy section, network segmentation for your own company is part of our IT services.
Open points: The content of EUR-Lex (Regulation 2022/30) was not reachable from here on 15 November 2026, so the application date (1 August 2025) rests on Schutzwerk and other secondary sources, not on our own reading of the legal text. We confirmed the standard version EN 303 645 V2.1.1 at ETSI. We do not know whether the vendor actually had the cybersecurity claim tested. For 802.1X, kill switch and Ethernet there is only the data sheet, plus the FauxHammer test for Ethernet. The per-change gram figures come from the vendor, CNC Kitchen and Prusa, none of them from us. The electricity price is an Austrian gross household corridor from March 2026, not a business tariff. We have no H3C in house.
Read next: Philips Hue Bridge: Pwn2Own flaws in the HomeKit service · Synology C2 Identity Edge Server and its CVSS discrepancy · Home Assistant Connect AUX-2
Further Reading
Status per source: verified = fetched and read by us on 15 November 2026, reported = statement by third parties, vendor-claimed = manufacturer statement, derived = calculated by us.
Primary sources
- Bambu Lab, H3C data sheet with the network entries, vendor-claimed, rows verified: bambulab.com
- Bambu Lab, comparison page with support dates, vendor-claimed, verified: bambulab.com
- Bambu Lab, EU shop with price, delivery date (around 26 November 2026, backorder) and cybersecurity note, vendor-claimed, verified (read through a browser tool): eu.store.bambulab.com
- Bambu Lab, E1 air purifier, 199.00 euros, verified: eu.store.bambulab.com
- Bambu Lab, H2D Pro with Ethernet and WPA2-Enterprise, vendor-claimed, verified: bambulab.com
- Bambu Lab, knowledge base article on LAN mode, verified (names H, P2S, X): wiki.bambulab.com
- EUR-Lex, Delegated Regulation (EU) 2022/30, not reachable again on 15 November 2026: eur-lex.europa.eu
- Schutzwerk, RED cybersecurity with application date 1 August 2025 (postponed by twelve months), reported, verified (retrieved 15 November 2026): schutzwerk.com
- ETSI, EN 303 645 V2.1.1 (2020-06) as a PDF, verified: etsi.org
- Prusa, CORE One+ (Gen 2) INDX 8-Tool, 2,209 euros assembled, 1,909 euros kit, 0.013 g, vendor-claimed, verified: prusa3d.com
Independent measurement
- FauxHammer, H3C review (no Ethernet, 64 GB eMMC, LAN-only), reported, verified (read through a browser tool): fauxhammer.com
- CNC Kitchen, test video of 5 November 2026, 43:06 minutes, 30 timestamps, affiliate links in the description, reported, verified: youtube.com
- CNC Kitchen, written report (50 mg waste, over 4,000 changes, power draw, US dollar prices), reported, verified (read through a browser tool): cnckitchen.com
Own arithmetic
- Electricity price corridor of 21 to 25 cents per kilowatt hour gross (household), Austrian price portal, March 2026, verified: smartmeter-portal.at
- The kilowatt hours and grams in this post are our own sums (derived) from the manufacturer's and the tester's figures: 4,000 changes times 0.05 g = 200 g, times 0.038 g = 152 g, times 0.013 g = 52 g, times 0.01 g = 40 g; 8,760 h times 11.7 W = 102.5 kWh, times 12.7 W = 111.3 kWh. Nobody measured them.
Does the Bambu Lab H3C have a wired network port?+
No. On the manufacturer's data sheet page, Ethernet, the network kill switch, a removable network module and 802.1X network access control all read not present, retrieved 6 November 2026 and read again on 15 November 2026. What is left is Wi-Fi 6 with IEEE 802.11 a/b/g/n/ac/ax. A network that onboards endpoints through 802.1X cannot take this device. A wireless network with a key for the workshop is no obstacle.
Does the H3C work without an internet connection?+
The manufacturer's knowledge base describes a LAN mode that runs without internet. Remote control from outside your own network, the phone app and the print history are then switched off. That page names the H, P2S and X series, and the H3C is not mentioned by name. CNC Kitchen and FauxHammer both mention LAN operation for the H3C; that is reported, and we have not tried it. If the function is a condition of an order, have it confirmed in writing before you buy.
How much material does one tool change cost?+
Four figures, none of them measured by us. The vendor states 0.038 g per change, with a footnote saying the real amount varies with print settings and material. CNC Kitchen measured about 0.05 g on a large model. Prusa advertises 0.013 g for the Core One+ INDX, and the tester counted about 0.01 g on his own machine with INDX. Across the more than 4,000 changes of that project that is 40 g to 200 g of filament.
senn-tech